MENSI LPG Propane Fireplace Pit GAS Control Cock Valve w/ Thermocouple, Knob

The valve is used for Gas heaters Inlet& Outlet thread is 3/8" Male Flare It may not fits your current Pipe and need some adapters 600mm thermocouple with M8*1 threaded head Universal thermocouple Bakelite knob OD 38mm, D shaft 6.1mm Only suitable for Low pressure application (max BTU rating: 50000) Suitable for Gas grill, heater, fire pit, fireplace if same connections Operation Instructions 1). Fix the valve on a plate or board of your grill or fire pit by the head screw and flange. 2). Connect your inlet and outlet hose on inlet and outlet side. (faston it tightly enough in case of gas leakage) 3). Connect thermocouple and end thread well 5). Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough. 6). Release your hand and it work properly If when you release hand, gas valve shut off again, Please check a. If your thermocouple is always be heated on flame b. If the thermocouple end is well connect with valve c. If the inlet and outlet side well connect with hose you have

• Low Working Pressure Max 1/2 PSI(65mbar), CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread
• Length of Thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000)
• Platic Black Bakelite Knob Diameter 38mm and "D" Insert for Valve 6.0-6.1mm
• Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar)
• Keep The Thermocoupler to be Heated and Push the Valve around 5-10s Then Release Hand (if Flame stops, Ajust the location of Thermocouple tip)