bestarc Plasma Cutter, BTC500 5th Generation 50Amps Plasma with LCD Large Screen Display Dual Voltage 110/220V, Plasma Cutting Machine with 220V

bestarc Plasma Cutter, Pilot Arc BTC500DP 7th Generation 50Amps Screen Display Dual Voltage 110/220V Digital Plasma Cutting Machine (BTC500DP 7Gen 110/220V) [IGBT inverter system]: Plasma cutter is blow back cutting machine with 50/60Hz IGBT inverter. Low frequency plasma cutting machine has low electromagnetic interference, higher cutting success rate, no interference to the power supply, and is very safe to the home power grid. [Operating voltages and air pressure]: BTC450NP supports 110/220v dual voltage, the front panel automatically detects and displays voltage. Equipped with 110v to 220v voltage conversion line. When connecting 110V, the recommended psi is between 20-40psi. When 220V is connected, the recommended psi is between 30-60psi. [Maximum cutting thickness]: When BTC450NP is connected with 220v, 45A@60% duty cycle, its maximum cutting thickness can be up to 14mm, clean cutting thickness is 10mm. Very suitable for cutting thin metal, automobile steel, frame, steel door, etc. [Automatic cutting]: 2T is semi-automatic cutting control, 4T is automatic cutting control. Switch to 2T, press and hold the torch switch to start arc and cutting, release the switch to stop arc and cutting. Switch to 4T, press the torch switch to start the arc and cutting. When you release the switch, the torch is still cutting. Press the switch again to stop cutting. [Post time function]: The post time adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head.